Orbi WiFi Extender Setup: What You Should Know?

Orbi wifi extender is a gadget meant to extend the Wi-Fi network coverage and enhance signal strength for Netgear’s Orbi Wi-Fi router. It permits you to use your smartphones outside the house and in a big area, for example, a large backyard. The satellite is automatically set to Orbi Mode. Orbi Mode is supported only with an Orbi wifi router. This blog will demonstrate the Orbi wifi extender setup in elaborative steps. Setting up the Orbi wifi extender is not like a regular wifi extender setup so follow the guidelines attentively and carefully. 

 

Easy Guidelines For Orbi Wifi Extender Setup

 

To set up the orbi extender follow all the guidelines given below carefully: 

• First of all, place the Orbi extender in close vicinity to your wifi router. This is mandatory only during the setup procedure to get rid of any obstruction between the connections.
•  After completing the setup you may unplug it and then plug it anywhere.
•  After that, plug it in an electrical supply socket, do not switch it on yet. 
•  In case, it automatically turns on and switches it off using the power button.
•  After that, you have to press+hold the sync button, and while holding it press and leave the power on/off button on the wifi extender.
• This will switch on your wifi extender. Keep in mind to not release the sync button before time.  
•  Keep holding it until the Orbi satellite is switched on. 
•  Next, you must wait patiently for the LED light to blink in blue and white and now leave the Sync button. Once you release the button, you will observe;

•    The blue LED will blink for a few moments when your satellite is starting up and moving from the orbi mode to extender mode
• · The satellite is set in extender mode and can be synced with the non-orbit wifi router.
•  Now, from your PC device or smartphone, connect to the extended network shown by, NETGEAR_EXT SSID.

•   Then you have to open the site mywifi.ext.net from your preferred web browser.
•           After this step, the NETGEAR installation assistant displays on the screen. 
•       To establish the connection between your Orbi satellite and wifi router network keep following the on-screen awards.
•    To check the status of the wifi router, the lights will show the following colours;
• ·     BLUE- This implies a good network connection.
•    AMBER-  This implies the connection is fair, but you can improve it by placing it near the wifi router.
• 
  
• · MAGENTA- This indicates that the network connection has failed. Consider moving it close to the wifi router again and try all the steps again.

 

Orbi Setup Wrapped Up!

 

With the guidelines given above, your Orbi wifi extender setup is complete. You can now enjoy the extended signals and internet connection of your Netgear wifi range extender. The orbi setup is not an easy sail, like other extenders. This works only with the Orbi extenders. But, to associate it with other wifi routers, you must follow the instructions from the above blog. Experience high internet speed and wider network coverage.