How To Complete Netgear Router Orbi WiFi Extender Setup

For the extension of the mesh network, the Netgear Orbi routers are the best choice. But, are you confused about the Netgear Router Orbi WiFi Extender Setup steps? There is no doubt that the involvement of the two devices-Orbi routers and satellite may confuse you with the steps. Don’t worry! This blog is here to help you out with the steps to complete the Netgear Router Orbi WiFi Extender Setup in an easy way. The steps will be explained in a detailed manner so that you can complete the setup properly. After this, you can access your network in the dead zone areas as well. So, let's start the journey for the Orbi WiFi Extender Setup.

 

Steps for Netgear Router Orbi WiFi Extender Setup

 The process may seem a bit complex, so complete all the steps very carefully. Following are the instructions to complete the Netgear Router Orbi WiFi Extender Setup:

 

Step 1: First, visit orbi-app.com and download the Orbi app on your smartphone.

Step 2: Then, open the Orbi app, and create your Netgear account.

Step 3: On the successful login, click on the Get Started Button present on the Welcome Screen.

Step 4: Tap on the Enable Camera and Scan option.

Step 5: Now, look for the QR code on the Orbi router, and scan it with the phone.

Step 6: Then, select the exact model of your product, and the number of satellites you are going to use for Orbi routers.

Step 7: Tap on the continue button.

Step 8: Now, restart the modem by unplugging it first, then plug it in.

Step 9: Wait for the LEDs to get stable on the modem, and tap on the Continue button again.

Step 10: Now, start the process to connect the Orbi WiFi system. To do so, follow the below bullet points:

• Connect your Orbi router to the modem using the ethernet cable.
• Then, plug the Orbi router into the power socket.
• Wait for some time like around 5 minutes till the Orbi router starts completely.
• Now, connect the desired number of Orbi satellites to the power supply in the same room of the router.

Step 11: Again, come to your phone and tap on the Continue button.

Step 12: You must see the progress bar on the screen signifying the start-up of the Orbi router.

Step 13: Now, follow the bullet points to connect the Orbi router with the existing/default WiFi network.

• Go to the WiFi settings on your smartphone.
• Look for the Orbi router’s SSID in the list of the available networks.
• Once, you are connected to the Orbi router’s network, then return to the app, and press the Continue button.

Step 14: The settings screen will open up in the app.

Step 15: After settings are done, tap on the Next button.

Step 16: The page will open for the Create WiFi network.

Step 17: Select the name for your Orbi network, and password, and tap the Next button.

Step 18: After that, select the different password for admin login on the Admin Setup page.

Step 19: Tap on the Next button.

Step 20: Set the Security Questions to help in the recovery of the admin credentials in the future.

Step 21: Now, your smartphone will connect to the Orbi WiFi network.

Step 22: Tap on the Continue button, and the app will look for a Firmware update if it is available.

Step 23: This may take around 5 minutes.

Step 24: Then, tap on the Update button if the update is available for firmware.

Step 25: Tap on the Next button in the app.

Step 26: Now, unplug the Orbi satellites from the same room.

Step 27: Connect it to the places where the network got dead or you want to extend the network.

 These steps complete the Netgear Router Orbi WiFi Extender Setup. Now, you can access the network at any point in your building without worrying much about dead zones.

 

Never Deprive For Network!

 These steps may seem complex and a bit tricky, but if followed properly, you can apply them easily. Therefore, with Netgear Router Orbi WiFi Extender Setup, you will never deprive the network in the mesh networks as well. Even, you get stuck somewhere, get instant help from our team by dialing the toll-free number. So, no more dead network zones for you!